Catalyst ligands

5144-89-8, 1,10-Phenanthroline hydrate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example I 2,9-bis(4methylphenyl)-1,10-phenanthroline (2). A 1.7 M solution of t-butyllithium in pentane (300 mL, 0.510 mol) was added under argon to a stirred suspension of p-iodotoluene (56.04 g, 0.257 mol) in ether (150 mL) at -78 C. The mixture was allowed to warm to room temperature over 1 h. The resulting solution of tolyllithium was added to a solution of 1,10-phenanthroline monohydrate (8.50 g, 0.043 mol) in toluene (100 mL). The resulting dark red solution was stirred under argon for 48 h. The reaction was carefully quenched with water (300 mL) and extracted with CH2 Cl2 (3*150 mL). The combined organic layers were dried (Na2 SO4) and evaporated to a volume of 500 mL under reduced pressure. The solution of crude product was oxidized by stirring with activated MnO2 (60 g). An additional portion of MnO2 (30 g) was added to the reaction after 1 h to ensure complete oxidation. After a total of 2 h, anhydrous MgSO4 (40 g) was added, and the mixture was filtered. The MnO2 /MgSO4 was washed with CH2 Cl2 (300 mL), and the solvent was concentrated to a volume of 50 mL, when a crystalline solid formed. The solution was cooled in ice and filtered. The light yellow product crystals were filtered, washed with one portion of cold toluene (20 mL), and dried. Yield 8.63 g 56%). 1 H NMR (CDCl3) delta8.38 (d, J=8.1 Hz, 4H), 8.29 (d, J=8.5 Hz, 2H), 8.13 (d, J=8.4 Hz, 2H), 7.77 (s, 2H), 7.40 (d, J=8.1 Hz, 4H), 2.47 (s, 6H)., 5144-89-8

As the paragraph descriping shows that 5144-89-8 is playing an increasingly important role.

Reference：
Patent; University of Pittsburgh of the Commonwealth System of Higher Education; US5998594; (1999); A;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

5144-89-8, 1,10-Phenanthroline hydrate is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example I 2,9-bis(4methylphenyl)-1,10-phenanthroline (2). A 1.7 M solution of t-butyllithium in pentane (300 mL, 0.510 mol) was added under argon to a stirred suspension of p-iodotoluene (56.04 g, 0.257 mol) in ether (150 mL) at -78 C. The mixture was allowed to warm to room temperature over 1 h. The resulting solution of tolyllithium was added to a solution of 1,10-phenanthroline monohydrate (8.50 g, 0.043 mol) in toluene (100 mL). The resulting dark red solution was stirred under argon for 48 h. The reaction was carefully quenched with water (300 mL) and extracted with CH2 Cl2 (3*150 mL). The combined organic layers were dried (Na2 SO4) and evaporated to a volume of 500 mL under reduced pressure. The solution of crude product was oxidized by stirring with activated MnO2 (60 g). An additional portion of MnO2 (30 g) was added to the reaction after 1 h to ensure complete oxidation. After a total of 2 h, anhydrous MgSO4 (40 g) was added, and the mixture was filtered. The MnO2 /MgSO4 was washed with CH2 Cl2 (300 mL), and the solvent was concentrated to a volume of 50 mL, when a crystalline solid formed. The solution was cooled in ice and filtered. The light yellow product crystals were filtered, washed with one portion of cold toluene (20 mL), and dried. Yield 8.63 g 56%). 1 H NMR (CDCl3) delta8.38 (d, J=8.1 Hz, 4H), 8.29 (d, J=8.5 Hz, 2H), 8.13 (d, J=8.4 Hz, 2H), 7.77 (s, 2H), 7.40 (d, J=8.1 Hz, 4H), 2.47 (s, 6H)., 5144-89-8

As the paragraph descriping shows that 5144-89-8 is playing an increasingly important role.

Reference：
Patent; University of Pittsburgh of the Commonwealth System of Higher Education; US5998594; (1999); A;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

A 20 mL two-necked round-bottomed flask was charged with 69.2 mg (0.23 mmol, MW: 301) of pybox- ip, 87.6mg(0.46 mmol, MW: 190.45) of CuI and 5.0 mL of anhydrous CH2Cl2. A slow stream of nitrogen was passed throughthe system, and the solution was stirred well at room temperature for 24 h by means of magnetic stirring bar. Theexcess CuI was filtered off and the solvent of the filtrate was removed under reduced pressure and a yellow solid wasformed. After drying in vacuum at room temperature, the yield of F was 76.0% (85.4 mg). The structure of thiscatalyst was not confirmed., 118949-61-4

The synthetic route of 118949-61-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Fakhruddin, Ahmad; Abu-Elfotoh, Abdel-Moneim; Shibatomi, Kazutaka; Iwasa, Seiji; Letters in Organic Chemistry; vol. 15; 3; (2018); p. 196 – 205;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.128249-70-7,2,6-Bis((R)-4-phenyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

Cobalt(II) tetrafluoroborate hydrate (25mg, 0.0675mmol) was added to a solution of (R)-LPh (50mg, 0.135mmol) in acetonitrile (15cm3). The resultant orange solution was stirred at room temperature for one hour. The product was precipitated using an excess of diethyl ether and the precipitate was collected by vacuum filtration, leaving an orange powder. A vapour diffusion of diethyl ether into a concentrated solution of the complex in acetonitrile gave orange crystals suitable for X-ray diffraction. Yield: 0.056g, 84%. Elemental microanalysis: found C, 56.6; H, 3.81; N, 8.53%: calcd for C46H38B2CoF8N6O4 C, 56.9; H, 3.94; N, 8.65%. 1H NMR (CD3CN): delta 2.7 (8H, Ph H2/6), 3.0 (4H, Ph H4), 7.7 (8H, Ph H3/5), 20.0 and 36.8 (both 4H, Ox H5), 40.5 (4H, Py H3/5), 84.7 (4H, Ox H4). No peak from the Py H4 proton environment was observed, which may be obscured by the CHD2CN solvent peak., 128249-70-7

The synthetic route of 128249-70-7 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

General procedure: (R)-LiPr (50mg, 0.17mmol) was dissolved in acetonitrile (15cm3). Zinc(II) tetrafluoroborate hydrate (20mg, 0.083mmol) was then added and the solution stirred at room temperature for one hour. A large excess of diethyl ether was added and the resultant precipitate was isolated by vacuum filtration leaving a white powder. Single crystals suitable for X-ray diffraction analysis were grown by vapour diffusion of diethyl ether into a concentrated solution of the product in acetonitrile. Yield: 0.054g, 78%.

118949-61-4, As the paragraph descriping shows that 118949-61-4 is playing an increasingly important role.

Reference：
Article; Burrows, Kay E.; Kulmaczewski, Rafal; Cespedes, Oscar; Barrett, Simon A.; Halcrow, Malcolm A.; Polyhedron; vol. 149; (2018); p. 134 – 141;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

1148-79-4, 2,2′:6′,2”-Terpyridine is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

UO2Cl4?·H2terpy?·H2O (1): A mixture of 1.7 ml (0.2 mmol) UCl4/HCl 0.12 M, 93 mg (0.4 mmol) 2,2???:6???,2???-terpyridine and 3.3 ml (19.8 mmol) HCl 6 M was placed in a Parr vessel and then heated statically at 120 ?°C for 48 h. The resulting yellow product was then filtered off, washed with water and dried at room temperature (reaction yield 77percent). XRD powder pattern indicated that the compound was obtained as a pure phase (Supplementary Information S3).

1148-79-4, The synthetic route of 1148-79-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Lhoste, Jerome; Henry, Natacha; Loiseau, Thierry; Guyot, Yannick; Abraham, Francis; Polyhedron; vol. 50; 1; (2013); p. 321 – 327;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.118949-61-4,2,6-Bis((S)-4-isopropyl-4,5-dihydrooxazol-2-yl)pyridine,as a common compound, the synthetic route is as follows.

A 20 mL two-necked round-bottomed flask was charged with 69.2 mg (0.23 mmol, MW: 301) of pybox- ip, 87.6mg(0.46 mmol, MW: 190.45) of CuI and 5.0 mL of anhydrous CH2Cl2. A slow stream of nitrogen was passed throughthe system, and the solution was stirred well at room temperature for 24 h by means of magnetic stirring bar. Theexcess CuI was filtered off and the solvent of the filtrate was removed under reduced pressure and a yellow solid wasformed. After drying in vacuum at room temperature, the yield of F was 76.0% (85.4 mg). The structure of thiscatalyst was not confirmed., 118949-61-4

The synthetic route of 118949-61-4 has been constantly updated, and we look forward to future research findings.

Reference：
Article; Fakhruddin, Ahmad; Abu-Elfotoh, Abdel-Moneim; Shibatomi, Kazutaka; Iwasa, Seiji; Letters in Organic Chemistry; vol. 15; 3; (2018); p. 196 – 205;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

27318-90-7, 1,10-Phenanthroline-5,6-dione is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A solution containing 1,10-phenanthroline-5,6-dione (1.6 mmol, 347 mg), substituted benzaldehyde (1.6 mmol), 20 ml of HAc and NH4Ac (33 mmol, 2.53 g), was heated at 110 °C under reflux for 4 h. Then, 20 ml of water was added and the pH value was adjusted to 7.0 at room temperature. The solution was filtered and dried in vacuum to obtain a yellow precipitate. The product was purified in a silica gel column by using ethanol as eluent. 1a: yield 78.4percent; mp. 217-219 °C, ESI-MS (in MeOH): m/z: 219.1, ([M + H]), 438.1,([M + 2H]2+). 2a: yield 79.5percent; mp. 226-228 °C, ESI-MS (in MeOH): m/z: 339.15, ([M + H]+), 678.1, ([M + 2H]2+). 3a: yield 64.4percent; mp. 262-265 °C, ESI-MS (in MeOH): m/z: 325.1, ([M + H]+), 650.3, ([M + 2H]2+). 4a: yield 75.7percent; mp. 234-236 °C, ESI-MS (in MeOH): m/z: 311.1, ([M + H]+). 5a: yield 67.1percent; mp. 232-235 °C, ESI-MS (in MeOH): m/z: 339.1, ([M + H]+). 6a: yield 67.7percent; mp. 280-283 °C, ESI-MS (in MeOH): m/z: 363.1, ([M + H]+), 726.1, ([M + 2H]2+). 7a: yield 63.4percent; mp. 269-273 °C, ESI-MS (in MeOH): m/z: 375.2, ([M + H]+), 750, ([M 2H]2+), 772.8, ([M + H + Na]2+).

27318-90-7, 27318-90-7 1,10-Phenanthroline-5,6-dione 72810, acatalyst-ligand compound, is more and more widely used in various fields.

Reference：
Article; Wu, Qiong; Fan, Cundong; Chen, Tianfeng; Liu, Chaoran; Mei, Wenjie; Chen, Sidong; Wang, Baoguo; Chen, Yunyun; Zheng, Wenjie; European Journal of Medicinal Chemistry; vol. 63; (2013); p. 57 – 63;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

22348-32-9, (R)-Diphenyl(pyrrolidin-2-yl)methanol is a catalyst-ligand compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3A. Preparation of TMS-prolinolTo a mixture of prolinol (10.0 g, 39.5 mmol) and imidazole (4.57 g, 67.1 mmol) in THF (100 mL) was added chlorotrimethylsilane (5.57 g, 51.3 mmol) over 15 min while maintaining the batch temperature below 30 0C. The resulting slurry was aged at 50 0C for 3-5 h. The reaction mixture was cooled to ambient tempearture and quenched by addition of MTBE (50 mL) and 15% aq NaCl (100 mL). The organic layer was washed with 15% aq NaCl (50 mL). The solution was azeotropically dried at the constant volume by feeding THF.HPLC MethodColumn: Ascentis Express Cl 8 (100×4.6mm, 2.7um)Column temperature: 45 0CFlow rate: 1.5 ml/minDetection: UV at 210nmGradient:Time(min) 0.1% H^PO4 (0A) MeCN (0A)0 95 51 95 512 10 90Retention times (minutes): prolinol (4.8 min); TMS prolinol (7.3 min)

22348-32-9, The synthetic route of 22348-32-9 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; MERCK SHARP &; DOHME CORP.; XU, Feng; DESMOND, Richard; HOERRNER, R. Scott; HUMPHREY, Guy, R.; ITOH, Tetsuji; JOURNET, Michel; YOSHIKAWA, Naoki; ZACUTO, Michael, J.; WO2010/144293; (2010); A1;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.216018-58-5,[2,2′:6′,2”-Terpyridine]-4,4′,4”-tricarboxylic acid,as a common compound, the synthetic route is as follows.,216018-58-5

2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylic acid3.65 g (10.0 mmol) of the compound (manufactured by Tateyama Kasei)Was placed in a 500 mL eggplant flask. continue,2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylic acid,5 mL of concentrated sulfuric acid and 300 mL of methanol were added,The resulting solution was heated to reflux for 6 hours.The reaction solution thus obtained was filtered off and the resulting solid was dried under vacuum to give 3.42 g ofTo obtain trimethyl 2,2 ‘: 6’, 2 “-terpyridyl-4,4 ‘, 4” -tricarboxylate.

The synthetic route of 216018-58-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; FUJIKURA LIMITED; YAMAGUCHI, TAKESHI; (16 pag.)JP5901496; (2016); B2;,
Metal catalyst and ligand design
Ligand Template Strategies for Catalyst Encapsulation – NCBI