Category: catalyst-ligand

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: (S)-3-(Piperidin-2-yl)pyridine( cas:494-52-0 ) is researched.Computed Properties of C10H14N2.Bade, Richard; White, Jason M.; Tscharke, Benjamin J.; Ghetia, Maulik; Abdelaziz, Ahmed; Gerber, Cobus published the article 《Anabasine-based measurement of cigarette consumption using wastewater analysis》 about this compound( cas:494-52-0 ) in Drug Testing and Analysis. Keywords: anabasine anatabine cigarette consumption waste water analysis; cigarettes, cotinine, nicotine, urinary excretion, wastewater-based epidemiology. Let’s learn more about this compound (cas:494-52-0).

Community tobacco use can be monitored over time using wastewater-based epidemiol. approaches by estimating the mass loads of nicotine and its metabolites, cotinine, or hydroxycotinine, in wastewater. The use of nicotine replacement therapies could vary in space and time and mask the true rates of tobacco consumption. Therefore, this work evaluated the content of tobacco specific markers, anatabine and anabasine, in cigarettes, in urine of smokers, and in wastewater. The results indicated that the anabasine content in both licit and illicit cigarettes in Australia is less variable than anatabine and is therefore considered a better measure of tobacco consumption. A study determining the excretion of tobacco-specific alkaloids of smoking and non-smoking volunteers gave an average urinary mass load of anabasine of 4.38μg/L/person and a daily mass load of 1.13μg/day/person. Finally, this was compared with the mass loads of anabasine from wastewater-based epidemiol. data of 3μg/day/person to estimate cigarette rates in a South Australian city: equivalent to 2.6 cigarettes/person/day. The rate of decline of cigarette use was greater when using anabasine as a measure of consumption compared with cotinine. This is the first study to estimate the rate of anabasine excretion, which can be used to estimate tobacco use independent of therapeutically prescribed nicotine.

Compounds in my other articles are similar to this one((S)-3-(Piperidin-2-yl)pyridine)Computed Properties of C10H14N2, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

Application of 494-52-0. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: (S)-3-(Piperidin-2-yl)pyridine, is researched, Molecular C10H14N2, CAS is 494-52-0, about Effects of nicotinic acetylcholine receptor-activating alkaloids on anxiety-like behavior in zebrafish. Author is Alzualde, Ainhoa; Jaka, Oihane; Latino, Diogo A. R. S.; Alijevic, Omar; Iturria, Inaki; de Mendoza, Jorge Hurtado; Pospisil, Pavel; Frentzel, Stefan; Peitsch, Manuel C.; Hoeng, Julia; Koshibu, Kyoko.

Alkaloids are a structurally complex group of natural products that have a diverse range of biol. activities and significant therapeutic applications. In this study, we examined the acute, anxiolytic-like effects of nicotinic acetylcholine receptor (nAChR)-activating alkaloids with reported neuropharmacol. effects but whose effects on anxiety are less well understood. Because α4β2 nAChRs can regulate anxiety, we first demonstrated the functional activities of alkaloids on these receptors in vitro. Their effects on anxiety-like behavior in zebrafish were then examined using the zebrafish novel tank test (NTT). The NTT is a relatively high-throughput behavioral paradigm that takes advantage of the natural tendency of fish to dive down when stressed or anxious. We report for the first time that cotinine, anatabine, and methylanatabine may suppress this anxiety-driven zebrafish behavior after a single 20-min treatment. Effective concentrations of these alkaloids were well above the concentrations naturally found in plants and the concentrations needed to induce anxiolytic-like effect by nicotine. These alkaloids showed good receptor interactions at the α4β2 nAChR agonist site as demonstrated by in vitro binding and in silico docking model, although somewhat weaker than that for nicotine. Minimal or no significant effect of other compounds may have been due to low bioavailability of these compounds in the brain, which is supported by the in silico prediction of blood-brain barrier permeability. Taken together, our findings indicate that nicotine, although not riskfree, is the most potent anxiolytic-like alkaloid tested in this study, and other natural alkaloids may regulate anxiety as well.

Compounds in my other articles are similar to this one((S)-3-(Piperidin-2-yl)pyridine)Application of 494-52-0, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

Most of the natural products isolated at present are heterocyclic compounds, so heterocyclic compounds occupy an important position in the research of organic chemistry. A compound: 2834-05-1, is researched, SMILESS is O=C(O)CCCCCCCCCCBr, Molecular C11H21BrO2Journal, Water, Air, & Soil Pollution called Recovery of Fuels Using the Supramolecular Gelation Ability of a Hydroxybenzoic Acid Bisamide Derivative, Author is Zapien-Castillo, Samuel; Montes-Patino, Jorge Jesus; Perez-Sanchez, Josue Francisco; Lozano-Navarro, Jessica Ismale; Melo-Banda, Jose Aaron; Mesini, Philippe J.; Diaz-Zavala, Nancy Patricia, the main research direction is hydroxybenzoic acid bisamide derivative fuel gelation.Application In Synthesis of 11-Bromoundecanoic acid.

In order to remedy the environmental pollution caused by oil spills, new materials with gelation capacity of organic solvents and fuels have been synthesized during the recent years. Among them, some of the most promising materials contain amide groups, which are often incorporated into the chem. structure of organogelators due to their effectiveness in gelling organic solvents through hydrogen bonds. A bisamide derivative of hydroxybenzoic acid (Bis-HUB1) was designed and synthesized in two steps and is able to congeal organic solvents. Gelation tests, critical gelation concentrations, and gel-sol transition temperatures were discussed in terms of its supramol. interactions. Intermol. hydrogen bonds and π-π stacking were studied through variable-temperature FTIR and UV-visible spectroscopy, while the structural characterization was performed via freeze-fracture TEM. Interestingly, Bis-HUB1 showed the ability to gel gasoline and diesel from monophasic and biphasic systems, which implies its potential use as a remediation agent in fuel spills. The results encourage further research.

Compounds in my other articles are similar to this one(11-Bromoundecanoic acid)Application In Synthesis of 11-Bromoundecanoic acid, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Huang, X. H.; Song, J. J.; Li, H.; Gong, M. T.; Zhang, Y. researched the compound: (S)-3-(Piperidin-2-yl)pyridine( cas:494-52-0 ).COA of Formula: C10H14N2.They published the article 《Selective removal of nicotine from the main stream smoke by using a surface-imprinted polymer monolith as adsorbent》 about this compound( cas:494-52-0 ) in Journal of Hazardous Materials. Keywords: nicotine removal stream smoke surface imprinted polymer monolith adsorbent; Adsorption; Molecularly imprinted polymer; Nicotine; Selective removal; Surface-imprinted monolith. We’ll tell you more about this compound (cas:494-52-0).

Using molecularly imprinted polymer as a selective adsorbent for gaseous toxicants is a novel attempt. In present work, a nicotine surface-imprinted monolith (MIM) was used for the selective removal of nicotine from smoke. First, the retention capacity and selectivity for this MIM was tested by using it as the stationary phase in gas chromatog. and chromatog. conditions optimized. Then, the gas phase adsorption isotherms of MIM were constructed and the adsorption thermodn. explored. At last, the applicability for MIM in the removal of nicotine in smoke was explored. Results indicated a stronger retention capacity and a higher selectivity of MIM toward the template vapor, with a capacity factor (87.88) and a selectivity factor (10.15) under the optimized conditions. A higher standard adsorption enthalpy change for this MIM toward the template (|ΔH0a| = 65.53 kJ mol-1) than that for the non-imprinted monolith (NIM) column (|ΔH0a| = 47.46 kJ mol-1) was observed The adsorption isotherm for MIM appears the BET type II shape, while that for the NIM was approx. linear. When this MIM was used as the adsorbent, it exhibited a high performance in the selective removal of nicotine from the main stream smoke, with an adsorption percentage of 99.43%.

Compounds in my other articles are similar to this one((S)-3-(Piperidin-2-yl)pyridine)COA of Formula: C10H14N2, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

The chemical properties of alicyclic heterocycles are similar to those of the corresponding chain compounds. Compound: 4-(p-Tolyl)-2,2:6,2-terpyridine, is researched, Molecular C22H17N3, CAS is 89972-77-0, about Effect of adenine moiety on DNA binding property of copper(II)-terpyridine complexes, the main research direction is copper adeninylmethylphenyl terpyridine nitrate complex preparation structure DNA binding; crystal structure copper adeninylmethylphenyl terpyridine nitrate complex.SDS of cas: 89972-77-0.

Two novel copper(II) terpyridine complexes, [Cu(atpy)(NO3)(H2O)](NO3)·3H2O (1) and [Cu(ttpy)(NO3)2] (2, atpy = 4′-p-N9-adeninylmethylphenyl-2,2′:6′,2”-terpyridine; ttpy = 4′-p-tolyl-2,2′:6′,2”-terpyridine) were prepared and structurally characterized by x-ray crystallog. Both complexes show a CuN3O2 coordination in a square pyramidal (4 + 1) geometry with terpyridine acting as an equatorial ligand. For complex 1, intermol. AA base pairing interaction is observed between N6 and N1 of adjacent adenines with N6···N1 of 3.027(7) Å. A mol. dynamics simulation of the DNA binding of two complexes showed that the adenine moiety plays an important role in the intercalation of 1 into DNA. This is verified by UV, fluorescence, CD and flow linear dichroism studies. The promotional effect from the adenine moiety to the intracellular DNA binding of complex 1 is also confirmed by the inductively coupled plasma mass (ICP-MS) spectrometry data which showed a significant higher copper content in DNA isolated from complex 1 treated MCF-7 and HeLa cells.

Compounds in my other articles are similar to this one(4-(p-Tolyl)-2,2:6,2-terpyridine)SDS of cas: 89972-77-0, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

Mangaiyarkarasi, R.; Priyanga, M.; Santhiya, N.; Umadevi, S. published an article about the compound: 11-Bromoundecanoic acid( cas:2834-05-1,SMILESS:O=C(O)CCCCCCCCCCBr ).HPLC of Formula: 2834-05-1. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:2834-05-1) through the article.

A simple and an efficient approach for in situ preparation of palladium nanoparticles (Pd NPs) in ionic liquid crystal (ILC) microemulsion is described. Microemulsion was formed by using a ternary mixture of triton X-100/ILC/water (in the ratio of 1.4:0.1:8.5). Three such microemulsions-1, 2 and 3 were formed by using three different ILCs namely ammonium ILC containing a cholesterol core (ILC-1), imidazolium ILC bearing a cholesterol core (ILC-2) and imidazolium ILC containing a biphenyl core (ILC-3), resp. The Pd NPs were characterized using UV-vis spectroscopy, transmission electron microscopy and X-ray diffraction studies. Among the three, microemulsion-2 which was prepared using ILC-2 yielded stable NPs with an average particle size of ∼20 nm. The NPs prepared in all three emulsions were examined as catalyst for Heck reaction. The catalytic efficiency was analyzed for four cross-coupling reactions involving iodobenzene with different substituted alkenes namely Me acrylate, Et acrylate, Bu acrylate and styrene. The coupling reactions were completed in a shorter period with good yields. Further, the recyclability test of Pd NPs revealed that the particles showed good activity until third catalytic cycle. The Pd NPs prepared in microemulsion-2 showed better activity compared to those prepared in microemulsions-1 and -3.

Compounds in my other articles are similar to this one(11-Bromoundecanoic acid)HPLC of Formula: 2834-05-1, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

HPLC of Formula: 89972-77-0. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: 4-(p-Tolyl)-2,2:6,2-terpyridine, is researched, Molecular C22H17N3, CAS is 89972-77-0, about Synthesis, structure, and DNA binding studies of copper(II) complexes of terpyridine derivatives.

Two Cu(II) complexes, [Cu(ttpy)2](ClO4)2 (1, ttpy = 4′-(p-Tolyl)-2,2′:6′,2”-terpyridine) and [Cu(Brphtpy)2](ClO4)2 (2, Brphtpy = 4′-p-Bromophenyl-2,2′:6′,2”-terpyridine), were synthesized and characterized for their DNA binding and cleaving ability. The crystal structure of complex 1 reveals an axially compressed six-coordinate geometry around Cu(II). In spite of having an axially compressed geometry, the polycrystalline EPR spectrum of complex 1 at 298 K shows g‖ > g⊥, indicating a dx2-y2 ground state for the Cu(II) complex. Both complexes 1 and 2 bind to CT DNA intercalatively with moderate binding strength (Kb = (8.4 ± 0.2) × 103 and (10.9 ± 0.2) × 104 M-1 (1 M = mol dm-3), resp.). Both of these complexes cleave plasmid DNA efficiently in the presence of peroxide.

Compounds in my other articles are similar to this one(4-(p-Tolyl)-2,2:6,2-terpyridine)HPLC of Formula: 89972-77-0, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

Synthetic Route of C5H8O3. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: (S)-5-(Hydroxymethyl)dihydrofuran-2(3H)-one, is researched, Molecular C5H8O3, CAS is 32780-06-6, about A facile and highly chemoselective protection of primary hydroxyl groups with 2-methyl-1-butene. Author is Figadere, Bruno; Franck, Xavier; Cave, Andre.

The chemoselective formation of tert-amyl ethers of primary hydroxyl groups in the presence of secondary hydroxyl groups is described. Thus, treatment of BuCH(OH)CH2OH with 1 equiv 2-methyl-1-butene in the presence BF3.Et2O afforded 78% BuCH(OH)CH2OCMe2Et and < 3% bis-tert-amyl ether. Compounds in my other articles are similar to this one((S)-5-(Hydroxymethyl)dihydrofuran-2(3H)-one)Synthetic Route of C5H8O3, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

Computed Properties of C5H8O3. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: (S)-5-(Hydroxymethyl)dihydrofuran-2(3H)-one, is researched, Molecular C5H8O3, CAS is 32780-06-6, about Synthesis of 2′-C-α-methyl-2′,3′-dideoxynucleosides. Author is Giri, Indrajit; Bolon, Pascal J.; Chu, Chung K..

A general method for the synthesis of 2′-C-α-methyl-2′,3′-dideoxynucleosides is presented. Stereofacial selectivity of the 2-C-methylation reaction of γ-lactone I (R = SiPh2CMe3, CH2Ph, CH2OCH2CH2OMe) has been investigated, in which the presence of a bulky group at the 5-hydroxymethyl produced the α-isomer as a major product. During glycosylation, the α-Me group directed the formation of nucleosides in favor of the β-isomer. This methodol. is applied to the synthesis of some new pyrimidine and purine nucleosides.

Compounds in my other articles are similar to this one((S)-5-(Hydroxymethyl)dihydrofuran-2(3H)-one)Computed Properties of C5H8O3, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Chemical Engineering Journal (Amsterdam, Netherlands) called Cu-doped Fe2O3 nanoparticles/etched graphite felt as bifunctional cathode for efficient degradation of sulfamethoxazole in the heterogeneous electro-Fenton process, Author is Qi, Haiqiang; Sun, Xiuping; Sun, Zhirong, which mentions a compound: 12069-69-1, SMILESS is O[Cu]OC(O[Cu]O)=O, Molecular CH2Cu2O5, Recommanded Product: 12069-69-1.

Bifunctional electrodes have attracted significant research interest in the field of heterogeneous electro-Fenton (hetero-EF) process for efficient treatment of antibiotic-containing wastewater. In this study, etched graphite felt (EGF) was used as the matrix material because of its excellent electrochem. properties, rich pore structure, and large sp. surface area. The transition metals Cu and Fe were in situ grown on the EGF electrode surface without polymer binder by a one-step hydrothermal method. The obtained electrode consisting of Cu-doped Fe2O3 nanoparticles/EGF (Cu-Fe2O3/EGF) was used in the hetero-EF process for in situ electro-generation and activation of hydrogen peroxide (H2O2) for efficient degradation of sulfamethoxazole (SMX). The Cu-Fe2O3/EGF electrode demonstrated a wide pH application range of 3.0-9.0. According to ESR and free-radical quenching experiments, hydroxyl radical and superoxide anion were the dominant species in the hetero-EF process, while the hydroxyl radical played a major role in the degradation of SMX. In consecutive runs, the electrode exhibited low metal ion leaching and excellent stability. Furthermore, the possible mechanism for the production and activation of H2O2 as well as possible SMX degradation pathways were proposed. The toxicity of SMX samples during degradation exhibited a decreasing trend according to the results of toxicol. simulation and Escherichia coli growth test. This study provides a new strategy for the construction of an efficient and stable bifunctional cathode for the advanced treatment of antibiotic-containing wastewater.

Compounds in my other articles are similar to this one(Basic copper carbonate)Recommanded Product: 12069-69-1, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Metal catalyst and ligand design,
Ligand Template Strategies for Catalyst Encapsulation – NCBI